Making Bolt in solid work using thread command

 Please follow the following steps

• Select New Part.

• Select Front plane.

• Sketch a polygon size : 100mm.

• Extrude the sketch (Features -----> Extruded Boss/Base) then select the mid plane.

• Set the Depth 40mm then click Ok.

• Now select any face of the object.

• Draw a circle up to its end R50.

• Apply the Extruded cut command ( Features -----> Extruded cut).

• Click on the Flip side to cut then set the edges angle 45deg then click on ok.

• Select any surface of the object.

• Draw a circle R20.

• Extrude the circle and set the depth 200mm.

• Apply Thread command ( Insert----> Features---->Thread..).

• Select the thread location.

• Select the end thread  end location.

• Set the Type : Metric Tap
• Set the size : M90*4.30
• Select Extrude Thread

If You want to Set the Type : Metric die then Select the Cut thread.

• Bolt is ready change the color if you want.

Watch Making Bolt in solid work using thread command