Sunday, June 27, 2021
Saturday, June 26, 2021
Friday, June 18, 2021
Sunday, June 6, 2021
LCD Screen for Beginner
Please follow the following steps
- Open solid work and select New Part as shown in Tutorial No.1.
- Select the any Plane as shown in the Tutorial No.2.
- Draw a Center Rectangle
- Go to:
- Sketch----> Center Rectangle
- keep the length 200mm and width 100mm of the Rectangle.
- Extrude the sketch
- Go To:
- Features ------> Extruded Boss/Base
- Depth 10mm
- Depth Angle:65deg
- Then click on Tick Mark.
- Select the back and draw a circle on it
- Go To:
- Sketch----->Circle
- keep Radius 28
- Extrude it
- Features ------> Extruded Boss/Base
- Depth 2mm
- Then click on Tick Mark
- Select the circle and draw a rectangle on it
- Go To:
- Sketch----->Rectangle
- Keep Length 70mm and width 23mm.
- Extrude it
- Features ------> Extruded Boss/Base
- Depth 4mm
- Then click on Tick Mark
- Select the base of the rectangle and draw a straight slot on it
- Go To:
- Sketch----->Straight Slot
- Extrude it
- Features ------> Extruded Boss/Base
- Depth 4mm
- Then click on Tick Mark
- Draw a Center Rectangle
- Go to:
- Sketch----> Center Rectangle
- Keep Length 190mm and width 90mm.
- Extrude Cut it
- Features ------> Extruded Cut
- Depth 1mm inside
- Then click on Tick Mark
- Select the border of the rectangle and draw a circle on it
- Go To:
- Sketch----->Circle
- keep the circle radius 1.5
- Extrude it
- Features ------> Extruded Boss/Base
- Depth 1mm
- Then click on Tick Mark
- LCD Screen is Ready
Watch LCD Screen for Beginner
Wednesday, June 2, 2021
How to sketch the circles
Please follow the following steps
- Open solid work and select New Part as shown in Tutorial No.1.
- Select the any Plane as shown in the Tutorial No.2.
- Click on the circle a small window will be open
- Go to:
- Sketch------->Circle-------> Select Simple Circle.
- Click where you want to sketch and Drag the mouse.
- Define the Circle as shown in Tutorial No.4 if You want .
- Exit the Sketch .
- Now the Circle is Ready.
- Now we will draw a perimeter Circle
- Go to:
- Sketch------->Circle-------> Select Perimeter Circle
- This circle want at least 3 point to draw. Click from where you want to start.
- Select the 2nd point.
- At the end Select the last point and Now your sketch is ready. If you want to define it define it otherwise exit the sketch
Watch How to sketch the Circle
Subscribe to:
Comments (Atom)
