LCD Screen for Beginner

 

Please follow the following steps 

• Open solid work and select New Part as shown in Tutorial No.1.

• Select the any Plane as shown in the Tutorial No.2.

• Draw a Center Rectangle
• Go to:
• Sketch----> Center Rectangle

• keep the length 200mm and width 100mm of the Rectangle.

• Extrude the sketch
• Go To:
• Features ------> Extruded Boss/Base
• Depth 10mm
• Depth Angle:65deg
• Then click on Tick Mark.

• Select the back and draw a circle on it
• Go To:
• Sketch----->Circle

• keep Radius 28

• Extrude it 
• Features ------> Extruded Boss/Base
• Depth 2mm
• Then click on Tick Mark

• Select the circle and draw a rectangle on it
• Go To:
• Sketch----->Rectangle

• Keep Length 70mm and width 23mm.

• Extrude it 
• Features ------> Extruded Boss/Base
• Depth 4mm
• Then click on Tick Mark

• Select the base of the rectangle and draw a straight slot on it

• Go To:
• Sketch----->Straight Slot

Keep Radius 30.

• Extrude it 
• Features ------> Extruded Boss/Base
• Depth 4mm
• Then click on Tick Mark

• Draw a Center Rectangle
• Go to:
• Sketch----> Center Rectangle

• Keep Length 190mm and width 90mm.

• Extrude Cut it 
• Features ------> Extruded Cut
• Depth 1mm inside
• Then click on Tick Mark

• Select the border of the rectangle and draw a circle on it
• Go To:
• Sketch----->Circle

• keep the circle radius 1.5

• Extrude it 
• Features ------> Extruded Boss/Base
• Depth 1mm
• Then click on Tick Mark

• LCD Screen is Ready

Watch LCD Screen for Beginner